Example 1 (above). Rusty and discoloured Pots and Nuts shine with the use of the POLCC-M
Examples 2 & 3 (above and below): The POLCC-P, the E.W.S polishing cloth for plastic parts, removes stains from pickguards and other plastic parts without the use of residue leaving sprays!
|
POLISH & RESTORATION CLOTHS
Left package: For plastic parts - Right package: For metal parts
The new POLCC-M and POLCC-P polishing cloths from E.W.S Japan have a micro abrasive compound that will effectively remove rust and stains and polish your instrument.
The E.W.S polishing cloths are very useful for restoring used instruments back to a "near-mint" condition - without the use of sprays that can sometimes leave hard to remove residue, particularly in areas that are difficult to reach. Designed with the professional in mind!
POLCC-M - For Metal Parts: Use this cloth for rusty, dull metal parts like frets, bridges, machine heads and electronics!
POLCC-P - For Plastic Parts: Use this cloth for dirty plastic parts like pick guards and knobs!
|
Instructions for use:
* Polish dirty area lightly and gently.
* After polishing, adequately wipe the surface with soft and clean dry cloth or tissue paper.
* The cloth will turn black after polishing metal parts, but the cleaning effect will remain almost the same.
* Do not wash totally in water. Active substance will wash out.
* For severe stain, spray small amount of water onto the cloth for more polishing effect.
* Do not use this product for wooden parts. |
Caution:
* Please wear thin gloves if you have sensitive skin.
* Plated products have thin film. Do not over polish plated products.
* Misuse of this product may leave streaks. Test before using.
* Do not polish if:
1. The instrument is brand new or has a near-mint condition shine.
2. The instrument has matted finish like "Satin finish" or "Pearskin finish". |
For more information on E.W.S or to purchase please call us on
FREECALL 1800 353 909 or contact us via webform or email |
